N600i digital label colour ink jet printer in production at Reynders
The first installation of the N600i digital colour ink jet label press takes Reynders Labelling to the next level in digital production.
“Although it is still early days, we are extremely impressed with the capabilities of the N600i” - CEO Marc Reynders
When it comes to quality and perfection, Reynders Label Printing knows just how to deliver.
From its humble beginnings over half a century ago, it has since expanded to become one of the leading label specialists in Europe.
Headquartered in Belgium, with 6 specialised printing divisions and 8 production facilities spread through Europe and Asia, Reynders prides itself in its commitment to delivering the very best in design and label printing in which innovation, quality and customer service are of paramount importance.
Today, family-run Reynders has over 60 printing presses and more than 450 printing stations.
- dry toner
- wet toner
- ink jet
- printing technologies, enabling it to offer one of the broadest ranges of label printing equipment for a host of applications. It has been this focus on maintaining its leading position through investment in the very latest label printing equipment that led to the installation of the very first Domino N600i digital colour ink jet label press at its Belgium production facility.
CEO Marc Reynders explains, “Over the past few years, label printing has been facing new challenges with customers demanding ever tighter delivery deadlines, shorter average run lengths, more personalised data; but still the highest quality of end product. As a result, we needed to find solutions that can not only cope with these changing demands, but that also means adjusting our service offering for our customers. It ultimately helps us to move our business forward in line with the changing dynamics of the industry.”
When Marc and his team first saw an early technology demonstration of the N600i at Ipex 2010, they were immediately impressed. For a digital printing press, it offered much higher levels of productivity combined with improved print quality for ink jet.
“We already had a number of HP Indigos, the latest Xeikon technologies and three Agfa Dotrix digital label presses all of which were doing a good job,” continues Marc, “But to take Reynders to the next level in digital label production we needed a solution that could offer high quality digital printing at significantly increased speeds. The N600i was just what we were looking for.”
The N600i digital colour ink jet label press:
- offers a native 600dpi print resolution
- uses one of the smallest drop sizes (6pl)
- delivers the highest quality output onto a range of coated paper and plastic label stocks
- operates at speeds of 50-75 metres per minute
- offers a standard 333mm (13”) wide web width
- provides up to 1,500m² of print per hour
- varies the droplet sizes delivered from a single print head to combine with the composition of the ink
- reproduces a wide colour gamut including over 80% of the pantone colour range
With so many label press technologies installed across Reynders multiple sites, the fact that Domino had integrated the Esko front end into its N600i added to its appeal to Reynders and assisted with its integration.
“We already worked with the Esko workflow and this - together with the intuitive user interface - made working with the N600i so much more straightforward,”
Installation didn’t go without its challenges, especially with the company agreeing to be a beta test site for Domino’s N600i, but both the Reynders and Domino teams worked together to ensure any issues were addressed and the installation met all requirements. “It’s fair to say that with any beta site, installation can take longer than usual, but we are delighted with the outcome,” confirms Marc. “We always had complete confidence in Domino throughout the process. They listened to our requirements, were extremely helpful in exploring ways to overcome any issues and conducted the installation with the utmost professionalism.”
Within a short time, the operations team had the N600i
- running at production speeds of 50 metres per minute, a significantly higher rate than the company’s existing digital technologies
- using the press for new mid-volume applications of up to 3,000 metres, well above the 1,000 metres limit they typically would schedule on digital machines
The increased speed of throughput brought additional challenges for the operators, as it meant they could no longer manually check for rejects and quality of output, as was the procedure for the company’s slower running solutions. As a result, Reynders installed an automated vision system onto the N600i line that could cope with verification of output at such high speeds, reducing operator intervention and adding further to production efficiencies.
To further develop the flexibility and capabilities of the N600i, Reynders and the Domino team are working together to develop new inks as well as review the integration of inline die-cutting technology within the N600i production line.
“Although it is still early days, we are extremely impressed with the capabilities of the N600i”
enthuses Marc, who is already looking to exploit the potential it can offer in terms of longer term new business opportunities.
“The N600i has certainly lived up to our expectations of high resolution, high quality output at significantly higher operational speeds. The operation has been reliable and we are able to run much longer production jobs than we would normally print with digital technology, in this respect it is more targeted at replacing what we would normally run on flexo machines”
“If the N600i continues to perform to our expectations and we can achieve all our business goals, we will be considering further investment in this technology in the future,” concludes Marc.
Posted on Tuesday 12th February 2013