BuyDomino Search Changer de région Menu

Ax-Series - How to Check i-Pulse RS Ink Jet Alignment

Safety Note

WARNING

Hazardous Chemicals. Risk of eye and skin damage.
Wear Gloves.png Wear Goggles.png

Wear protective equipment such as gloves and glasses when near the printer.

Contact with chemicals can cause skin or eye damage. Refer to Safety Data Sheet.

Description

i-Pulse RS Print Head.png

Step 1

Check Ink Jet Alignment

  1. Twist and remove the print head cover.

    i-Pulse RS Print Head - Alignment - Illustration 1.png

  2. Fit the print head into a wash station, or place a beaker underneath the print head.

  3. With the ink jet running, check the position that each ink jet enters the gutter as shown in the following diagrams.

    ILLUSTRATION

    #

    EXPLANATION

    i-Pulse RS Print Head - Alignment - Illustration 2.png

    i-Pulse RS Print Head - Alignment - Illustration 3.png

    		 1 Front view: Ink jet nearly touching left side of gutter wall.
    2 Side view:  Ink jet in centre of gutter.
  4. If the alignment is incorrect, an engineer certified by Domino can re-align the ink jet.

  5. Replace the print head cover.