Edit the Label Settings

To edit the label settings:

1. On the TouchScreen, select Home > Edit current label.
   
   
2. Select Label > Edit.
   
   
3. Select the Edit icon.
   
   
   
   
4. The following settings can be defined on the right side of the label editor:
   
   

   Setting Name	Explanation
   Number of lines	Select the required number of lines: 1, 2, 3, 4 or 5.
   Line height (drops)	Select the required height for each line in ink drops.
   Type	Select the required label quality.
   Overall height (mm)	Select the height of the label.
   Use default height (%)	Tick the tick box to use the default print height setting. Untick the tick box to display the Height (%) setting.
   Height (%)	Note: This setting is only valid if the Use default height (%) tick box is not ticked. Set the print height percentage.
   Use default stroke pitch	Tick the tick box to use the default stroke pitch setting. Untick the tick box to display the Stroke pitch (mm/stroke) setting.
   Stroke pitch (mm/stroke)	Note: This setting is only valid if the Use default stroke pitch tick box is not ticked. Set the distance between print strokes. A stroke is the line of ink drops which is used to make up each printed character.

   
   
   
5. Select the Save icon to save the change.
   
   

[End of Procedure]