Gx-Series - How to Replace an Ink Cartridge (PRO Printhead)

Safety Note

WARNING

Hazardous Chemicals. Risk of eye and skin damage. 

General Warning.png Wear Gloves.png Wear Goggles.png

Wear protective equipment, for example gloves and glasses, when near the equipment.

Contact with chemicals can cause skin or eye damage. Refer to Safety Data Sheet. 

CAUTION

Hazardous Chemicals. Risk to the environment.

General Warning.png  

Obey local waste disposal regulations to dispose of used cartridges.

Used cartridges can contain residual chemicals that are hazardous to the environment.

Description

PRO Printhead Type

PRO Universal

PRO PH.png

 

  Note Icon.png  NOTE

  • Do not remove an ink cartridge from a printhead when the print group is in the "Ready" state. Stop the print group and make sure that it is in the "Idle" state before you remove an ink cartridge from a printhead.
  • If the print group is in "Auto‑swap" mode, wait until the user interface tells you to replace the ink cartridge.

  Tools Icon.png  TOOLS

Tools/Equipment Required:

  • Ethanol cleaning wipes (part number EPT039697)
  • Lint-free cloth (part number 49875)

Step 1

To Replace a PRO Ink Cartridge

  1. If the print group is active, stop the print group. Select STOP, select the print group and select Stop. 

  2. Open the ink cartridge cover and remove the ink cartridge.
    PRO_Remove_Cartridge.png

  3. Remove the cap from the new ink cartridge.

  4. Clean the electrical contacts with an ethanol wipe to remove corrosion protection. 
    PRO_Contacts.png

  5. Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.

    CAUTION

    Sensitive Equipment. Risk of Equipment Damage. 

    General Warning.png  

    Do not use an ethanol wipe or any other chemical to clean the cartridge nozzles.

    Use a new/clean lint-free cloth. If chemicals are used to clean the cartridge, the nozzles can be damaged.


      Note Icon.png  NOTE

    • Wipe the nozzles at a 45° angle to decrease the chance that debris will move from one nozzle to the next nozzle.
    • Always use a clean part of the cloth to wipe the nozzles.
    • Do not use force to wipe the nozzles.
     
  6. Insert the ink cartridge into the printhead.

    [6.1] Align the small tabs on the sides of the ink cartridge with the guide plates in the printhead.
    [6.2] Make sure that the small tabs on the ink cartridge stay in contact with the guide plate as you push the ink cartridge into the printhead.
    [6.3] Push the ink cartridge into the printhead until it is fully in position.
    Install_PRO_Printhead_Ink_Cartridge__6_X_.png

  7. Close the ink cartridge cover.
    PRO_Close_Cover.png

[End of Procedure]