BuyDomino Search Compte Changer de région Menu

Ax-Series - How to Check i-Pulse Ink Jet Alignment

Safety Note

WARNING

Hazardous Chemicals. Risk of eye and skin damage.

Wear protective equipment such as gloves and glasses when near the printer.

Contact with chemicals can cause skin or eye damage. Refer to Safety Data Sheet.

Description

i-Pulse Print Heads.png

Step 1

Check Ink Jet Alignment

  1. Remove the holster from the print head by pressing in the two holster retaining clips and withdrawing the holster.

  2. Fit the print head into a wash station, or place a beaker underneath the print head.

  3. With the ink jet running, check the position that the ink jet enters the gutter as shown in the following diagrams.

    ILLUSTRATION

    #

    EXPLANATION
    i-Pulse Print Head - Alignment - Illustration 1.pngi-Pulse Print Head - Alignment - Illustration 2.png 1 Front view: Ink jet ⅓ from left side of the gutter wall.
    2 Side view: Ink jet in centre of gutter.
  4. If the alignment is incorrect, an engineer certified by Domino can re-align the ink jet.

  5. Replace the print head holster.