BuyDomino Search Change Region Menu

Ax-Series - How to Check i-Pulse Duo Ink Jet Alignment

Safety Note

WARNING

Hazardous Chemicals. Risk of eye and skin damage.

Wear protective equipment such as gloves and glasses when near the printer.

Contact with chemicals can cause skin or eye damage. Refer to Safety Data Sheet.

Description

i-Pulse Duo Print Head.png

Step 1

Check Ink Jet Alignment

  1. Remove the print head cover by unscrewing the locking screw on the rear of the print head and sliding the cover off.

  2. Fit the print head into a wash station, or place a beaker underneath the print head.

  3. With both ink jets running, check the position that each ink jet enters the gutter as shown in the following diagrams.

    ILLUSTRATION

    #

    EXPLANATION

    i-Pulse Duo Print Head - Alignment - Illustration 1.png

    i-Pulse Duo Print Head - Alignment - Illustration 2.png

    		 1 Front view: Ink jet ¼ from left side of the gutter wall.
    2 Side view: Ink jet in centre of gutter.
  4. If the alignment is incorrect, an engineer certified by Domino can re-align the ink jet.

  5. Replace the print head cover and tighten the locking screw.