Ax-Series - Alert ID 15 - Deflection EHT has Tripped

Problem description

Ax-Series Range.png

CAUSE	REMEDY
Spark across the EHT plates	Run the print height calibration wizard and slightly reduce the EHT (%) value: How to use Print Height Calibration Wizard Note: The EHT (%) value must only be adjusted in small steps.
Ink build up on charge electrode	Clean the print head: How to Clean i-Pulse Print Head How to Clean i-Pulse Duo Print Head How to Clean i-Pulse RS Print Head
Partially blocked nozzle	Run the nozzle unblocking wizard: How to Clear a Blocked Nozzle
Ink jet clipping the gutter	Check the print height calibration: How to use Print Height Calibration Wizard Also, check the ink jet alignment: i-Pulse Ink Jet Alignment Check i-Pulse Duo Ink Jet Alignment Check i-Pulse RS Ink Jet Alignment Check
Excessive print height	Run the print height calibration wizard: How to use Print Height Calibration Wizard
Ink leak at nozzle	Check for ink drops around the nozzle and call an engineer certified by Domino to repair or replace the nozzle.