BuyDomino Suchen Region ändern Menü

Ax-Series - How to Prime the Ink System

Safety Note

WARNING

Hazardous Chemicals. Risk of eye and skin damage.
General Warning.png Wear Gloves.png Wear Goggles.png

Wear protective equipment such as gloves and glasses when near the printer.

Contact with chemicals can cause skin or eye damage. Refer to Safety Data Sheet.

Description

Ax-Series Range.png

Note Icon.png  NOTE

  • The ink system must be primed before the printer can be used for the first time.

  • Before starting this procedure, ensure that the ink and make-up levels are at least half full.

    • This will be indicated by yellow or green make-up and ink level icons on the information bar on the TouchScreen.

Step 1

Run the Ink Priming Wizard

  1. Fit the print head into a wash station, or place a beaker underneath the print head.

  2. On the TouchScreen, select Home > Setup > Wizards > Ink priming.

  3. Select Start ink priming.

    Note Icon.png  NOTE
    • The ink priming wizard will take 12 minutes to complete.
  4. Select Complete when the ink priming process is finished

Step 2